Bharath Oil Company

Our wide range of Metal Working Oils include:

Soluble Cutting Oils
Servocut S forms a milky emulsion with water and contains rust inhibitor to impart anti-rust, anti-corrosion properties and a biocide to prevent bacterial growth in the emulsion. This oil has superior cooling and lubricating properties, which impart excellent surface, finish and minimize tool wear. It is used in concentration of 5% and for grinding, more dilute emulsions are recommended. For stable emulsion oil should be added to water. It meets 81S: 1115 1986 specification and is recommended for a variety of cutting operations on ferrous and nonferrous metals.

Synthetic Soluble Cutting Oils
Servosynth oils are water-soluble synthetic grinding coolants. The solutions prepared from these coolants are clear and free from any oil or fatty matter. These products have remarkable anti-rust characteristics. Servosynth 5 contains a special inhibitor, which protects cuprous metal components of machine tools and is specially recommended for grinding operations of iron, steel non-alloyed steel and nickel-chrome steel. Servosynth 2 is recommended for grinding of ferrous metals, high nickel and titanium alloys only. These oils are not recommended for machining of non-ferrous metals. These oils meet IS: 11186 - 1985 specification.

Neat Cutting Oils
Servocut 51 is a non-staining type neat cutting oil blended from high VI base oils and contains fatty material enhancing its free flowing and heat dissipation characteristics. It maintains light colour during service providing good visibility of machining operation and meets IS: 3065-1985 Type I Grade II specifications. This oil is recommended for machining ferrous as well as non-ferrous metals. Servocut 51 is also recommended for free cutting on mild steel, which involves high spindle speeds and short cycle time, particularly on screw automats, capstan or turret lathes.

Neat Honing Oils
Servomet 033 is a low viscosity neat cutting oil with excellent anti-weld and lubricity characteristics required for severe machining operations of aluminum alloys, magnesium and brass. The oil has superior heat transfer property to cool effectively under high-speed operations. It is recommended for deep hole drilling and similar operations of non-ferrous metals where oil is fed under pressure to the cutting area to wash swart and debris. It can be used in some free machining operations of ferrous metals.

Aluminium Rolling Oil (Neat)
Servoarol Light is a premium quality low viscosity straight mineral oil, especially developed for cold rolling operations without affecting gauge accuracy. Its narrow boiling range and high IBP reduces the evaporation rate thereby bringing down the roll coolant consumption. It has inherent oiliness property to reduce friction, help metal reduction without permitting slippage. It is non-staining and non-corrosive and has good additive solubility for fats and alcohols, which are added by the aluminum manufacturers for production advantages. It meets the requirements of Food Drug Administration, USA.